The power plant on the basis of artificial tornado

Project description

We see the experiment of building a power plant on the basis of artificial tornado.

The rotation of air there is a pressure differential on the Central axis of the tower. This pressure difference the more air mass and the greater the speed of rotation. The rotation speed of the we can not change, it depends on the speed of the oncoming wind. But we can change the mass of air inside the tower. Inside of this design revolves around 200 pounds of air. This mass proved critically small to create rich, powerful tornado that can generate electricity.

Tower height of 67 and a diameter of 30 meters can accommodate more than 50 tons of air. Such a mass when rotating is sustainable and powerful structure to create an artificial tornado.

Create a rotor diameter of 30 meters don't pose any difficulty. Each segment of the rotor with integrated generator is a permanent magnet will have a length of 3 meters, and are assembled at the installation site of the tower. The rotor has a Central axis and can be much larger in diameter and therefore power. For example, a tower with a diameter of 300 meters and a height of 650 meters — installed capacity of 50 megawatts or more. Due to the permanent magnets of the rotor is held in the stator, the so-called magnetic suspension.

The construction of the tower is from top to bottom. First going to the top. Further, the tower rises to a height of 4 meters and below the first section is drawn second, and so on. All of the sections and the rotor are collected at the earth's surface and rise with the tower. In place Assembly requires no meter 70, and the over 700 foot crane.

I am sure that if you need to build a power plant on the basis of artificial tornado, it is necessary to move in this direction taking into account the obtained experimental data and with investment.

Points of the project:

1. The design of the tower with a diameter of 30 meters and a height of 67 meters, the generator capacity of 250 kW.

2. The construction of a mathematical model in the steady state

3. The construction of the tower

4. Estimation of parameters and final report.

Price: 15000000 rubles (over 250 kW of installed capacity)

https://www.startbase.ru/proje.

http://espej1.livejournal.com/.

https://plus.google.com/u/0/10.

Thank you for your attention.