Environmental heat pump of the vortex type (cavitation heat generator), an alternative to gas and solid fuel boilers

Using our technology the cavitation effect occurs three times:

• On the water supply.
• The rotor nozzle of Loval.
• Between the two chambers (feed pressure).
• Technology is absolutely safe in respect of ecology, fire and explosion, electrical safety, etc., is a source of thermal energy, ensures demand for these products, return on investment, short payback period.
• In addition to receiving of heat energy for heating and DHW will be able to expand the scope of opportunities and effects of cavitation, including disinfection of water pools, getting structured water for health purposes, increase the yield of crops, etc.

Already assembled and has 8 settings.

Components and assemblies of our vortex pump (cavitation heat generator) then NV is assembled from parts and components ordered at different companies. The cost of one installation of NV-18, 5 with a full set is 4 500уе, with own production, this figure will be reduced to 40-50%.

Competitors hydrodynamic cavitation rotary installations are generators of thermal energy based on the use of hydrocarbons (combustion), different types of solid fuel. And also sources of alternative power (alternative, renewable, solar panels, underground heat, etc.). The main competitors of Nai technologies is a company "Teplo 21 century", a comparative analysis of our development, where you can see that we exceed their cost and technology. We have plane there is a section on research and development. 6 months after innserve we can lose one step from you main competitor increasing KPIs to 2, 5.
More detail in the annexes.

The uniqueness lies in the fact that the destructive force of cavitation is converted into heating the water and does not destroy the parts of the system. In addition there is water disinfection, which gives the opportunity to apply these settings in the pools without using chlorine.

The translation efficiency of electricity and heat is not linear and exceeds the indicator of zatrachivaniya energy allocated to heat. Spent 1 kW of electricity we get 1, 47 kW of heat. It's not perpetual motion, mu do of 1 kW electricity 1, 47 (this is not an opportunity), when cavitation occurs, the additional heat when you break the atomic bonds. The application will be a detailed description of this physical process. A file called "explanation of KPIs".

1) Selling technology

2) Wholesale trade, creation of a dealer network (low cost production)

3) Participation in national and international environmental programs

Installation cost is calculated based on the capacity of the HB as expressed in its power in kW. Today the cost is 270 Bel. RUB (135уе) per 1 kW of installed motor power, this setting gives you 1, 47 kW of heat. Reorganizatsii production will decrease by 40-60% without additional costs.

There is developed a line of products.

Have a practical notion of the cost of goods and cost reduction.

1) Organization of production of parts and assemblies of the pump.

2) Permanent NICR:
-finalization of the technology (increase CPGA to 2, 5);

-development of low-power pump for 220 (dostupnost in every private house)

3) Create dilerskoy distribution network and participation in international Gosudarstvennyj programmes (energy and environment).

4) to Increase the number ustanovlennyh and working units and awareness of technology.

Have an understanding of the organization of the sales Department (sales). The classical production model.

5) Selling technology is very large igricu market.